Tezos_p2p.P2pTezos P2p layer - Dynamic overlay network of authenticated peers.
The P2P layer implements several mechanisms, notably:
The protocol sends/receives messages to maintain the network topology, and also "generic" application messages that can be sent and received by the upper-layer. See P2p_message.
The protocol may operate in *private* mode, in which only user-provided points (a.k.a. *trusted* ) are used. In particular, points advertisements and swap requests messages are ignored.
The module P2p_pool maintains pools of points, peers and connections.
Several workers are used:
P2p_maintenance tries to regulate the number of connectionsP2p_welcome waits for incoming connectionsP2p_discovery looks for points on the local network via UDP messagesPoints can be trusted. This is relevant in private mode (see above), but generally peers shouldn't advertise trusted points.
Addresses and peers can be *banned* (a.k.a. blacklisted). In which case, connections to and from them should be ignored.
Addresses or peers can be *greylisted*. As for banning, greylisting can be enforced via the API, but also dynamically when the peer isn't able to authenticate. Eventually greylisted peers are whitelisted again.
Many types used in the P2p layer are parameterized by three type parameters:
'msg: type of messages exchanged between peers'peer_meta: type of the metadata associated with peers (score, etc.)'conn_meta: type of the metadata associated with connectionsThe concrete types, and functions operating on them, are defined by the calling layer, and passed to P2p.create. See module P2p_params.
type config = {listening_port : Tezos_base.TzPervasives.P2p_addr.port option;Tells if incoming connections accepted, specifying the TCP port on which the peer can be reached (default: 9732)
listening_addr : Tezos_base.TzPervasives.P2p_addr.t option;When incoming connections are accepted, precise on which IP address the node listen (default: [::]).
advertised_port : Tezos_base.TzPervasives.P2p_addr.port option;If incoming connections accepted, specifying the TCP port other peers should use to connect to this peer (default: listening_port). Can be used when this peer is behind NAT.
*)discovery_port : Tezos_base.TzPervasives.P2p_addr.port option;Tells if local peer discovery is enabled, specifying the TCP port on which the peer can be reached (default: 10732)
discovery_addr : Ipaddr.V4.t option;When local peer discovery is enabled, precise on which IP address messages are broadcast (default: 255.255.255.255).
trusted_points : (Tezos_base.TzPervasives.P2p_point.Id.t
* Tezos_base.TzPervasives.P2p_peer.Id.t option)
list;List of hard-coded known peers to bootstrap the network from.
*)peers_file : string;The path to the JSON file where the metadata associated to peer_ids are loaded / stored.
*)private_mode : bool;If true, only open outgoing/accept incoming connections to/from peers whose addresses are in trusted_peers, and inform these peers that the identity of this node should not be revealed to the rest of the network.
identity : Tezos_base.TzPervasives.P2p_identity.t;Cryptographic identity of the peer.
*)proof_of_work_target : Tezos_crypto.Crypto_box.pow_target;Expected level of proof of work of peers' identity.
*)trust_discovered_peers : bool;If true, peers discovered on the local network will be trusted.
reconnection_config : Tezos_p2p_services.Point_reconnection_config.t;The reconnection delat configuration.
*)disable_peer_discovery : bool;If set to true, the p2p layer will not participate to the peer discovery mechanism. The p2p layer will not be able to find new peers to connect with. For more details, refers to field disable_peer_discovery of P2p_connect_handler.config.
}Network configuration
type ('msg, 'peer_meta, 'conn_meta) net = ('msg, 'peer_meta, 'conn_meta) tval announced_version :
('msg, 'peer_meta, 'conn_meta) net ->
Tezos_base.TzPervasives.Network_version.tval pool :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) P2p_pool.t optionval connect_handler :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) P2p_connect_handler.t optionval faked_network :
'msg Tezos_base.TzPervasives.P2p_params.message_config ->
'peer_meta Tezos_base.TzPervasives.P2p_params.peer_meta_config ->
'conn_meta ->
('msg, 'peer_meta, 'conn_meta) netA faked p2p layer, which do not initiate any connection nor open any listening socket
val create :
?fd_pool:P2p_fd.fd_pool ->
config:config ->
limits:Tezos_p2p_services.P2p_limits.t ->
?received_msg_hook:
(('msg, 'peer_meta, 'conn_meta) connection -> 'msg -> unit) ->
?sent_msg_hook:(('msg, 'peer_meta, 'conn_meta) connection -> 'msg -> unit) ->
?broadcasted_msg_hook:
(('msg, 'peer_meta, 'conn_meta) connection
Tezos_base.TzPervasives.P2p_peer.Table.t ->
?except:(('msg, 'peer_meta, 'conn_meta) connection -> bool) ->
?alt:((('msg, 'peer_meta, 'conn_meta) connection -> bool) * 'msg) ->
'msg ->
unit) ->
'peer_meta Tezos_base.TzPervasives.P2p_params.peer_meta_config ->
'conn_meta Tezos_base.TzPervasives.P2p_params.conn_meta_config ->
'msg Tezos_base.TzPervasives.P2p_params.message_config ->
('msg, 'peer_meta, 'conn_meta) net Tezos_base.TzPervasives.tzresult Lwt.tMain network initialization function
received_msg_hook is a function that is called every time a message 'msg is received. sent_msg_hook is a function that is called every time a message 'msg is sent. broadcasted_msg_hook is a function that is called every time a message 'msg is broadcasted.
val activate : ('msg, 'peer_meta, 'conn_meta) net -> unitval peer_id :
('msg, 'peer_meta, 'conn_meta) net ->
Tezos_base.TzPervasives.P2p_peer.Id.tReturn one's peer_id
val maintain :
('msg, 'peer_meta, 'conn_meta) net ->
unit Tezos_base.TzPervasives.tzresult Lwt.tA maintenance operation : try and reach the ideal number of peers
val roll : ('msg, 'peer_meta, 'conn_meta) net -> unit Lwt.tVoluntarily drop some peers and replace them by new buddies
val shutdown : ('msg, 'peer_meta, 'conn_meta) net -> unit Lwt.tClose all connections properly
val connections :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) connection listAccess the domain of active peers
val find_connection_by_peer_id :
('msg, 'peer_meta, 'conn_meta) net ->
Tezos_base.TzPervasives.P2p_peer.Id.t ->
('msg, 'peer_meta, 'conn_meta) connection optionReturn the active peer with identity peer_id
val find_connection_by_point :
('msg, 'peer_meta, 'conn_meta) net ->
Tezos_base.TzPervasives.P2p_point.Id.t ->
('msg, 'peer_meta, 'conn_meta) connection optionReturn the active peer corresponding to point
val connection_info :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) connection ->
'conn_meta Tezos_base.TzPervasives.P2p_connection.Info.tAccess the info of an active peer, if available
val connection_local_metadata :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) connection ->
'conn_metaval connection_remote_metadata :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) connection ->
'conn_metaval connection_stat :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) connection ->
Tezos_base.TzPervasives.P2p_stat.tval negotiated_version :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) connection ->
Tezos_base.TzPervasives.Network_version.tReturns the network version that will be used for this connection. This network version is the best version compatible with the versions supported by ours and the remote peer.
val disconnect :
('msg, 'peer_meta, 'conn_meta) net ->
?wait:bool ->
reason:string ->
('msg, 'peer_meta, 'conn_meta) connection ->
unit Lwt.tCleanly closes a connection.
val global_stat :
('msg, 'peer_meta, 'conn_meta) net ->
Tezos_base.TzPervasives.P2p_stat.tval get_peer_metadata :
('msg, 'peer_meta, 'conn_meta) net ->
Tezos_base.TzPervasives.P2p_peer.Id.t ->
'peer_metaAccessors for meta information about a global identifier
val set_peer_metadata :
('msg, 'peer_meta, 'conn_meta) net ->
Tezos_base.TzPervasives.P2p_peer.Id.t ->
'peer_meta ->
unitval connect :
('msg, 'peer_meta, 'conn_meta) net ->
?trusted:bool ->
?expected_peer_id:Tezos_base.TzPervasives.P2p_peer.Id.t ->
?timeout:Ptime.span ->
Tezos_base.TzPervasives.P2p_point.Id.t ->
('msg, 'peer_meta, 'conn_meta) connection Tezos_base.TzPervasives.tzresult
Lwt.tconnect net ?trusted ?expected_peer_id ?timeout point attempts to establish a connection to point within an optional duration timeout. The optional arguments trusted and expected_peer_id can be used to specify whether the connection should be trusted and to provide the expected remote peer's id, respectively.
val recv :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) connection ->
'msg Tezos_base.TzPervasives.tzresult Lwt.tWait for a message from a given connection.
val recv_any :
('msg, 'peer_meta, 'conn_meta) net ->
(('msg, 'peer_meta, 'conn_meta) connection * 'msg) Lwt.tWait for a message from any active connections.
val send :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) connection ->
'msg ->
unit Tezos_base.TzPervasives.tzresult Lwt.tsend net peer msg is a thread that returns when msg has been successfully enqueued in the send queue.
val try_send :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) connection ->
'msg ->
booltry_send net peer msg is true if msg has been added to the send queue for peer, false otherwise
val broadcast :
('msg, 'peer_meta, 'conn_meta) net ->
('msg, 'peer_meta, 'conn_meta) connection
Tezos_base.TzPervasives.P2p_peer.Table.t ->
?except:(('msg, 'peer_meta, 'conn_meta) connection -> bool) ->
?alt:((('msg, 'peer_meta, 'conn_meta) connection -> bool) * 'msg) ->
'msg ->
unitbroadcast net connections ~except ~(alt:if_conn,then_msg) msg will send messages to all connections that do not satisfy the predicate except. alt can be used to send an alternative message then_msg to connections that do satisfy the if_conn predicate. ?except and ?alt can be used to selectively transfer messages.
Broadcasting is best effort and nothing ensures that messages are actually received (https://gitlab.com/tezos/tezos/-/issues/4205).
val fold_connections :
('msg, 'peer_meta, 'conn_meta) net ->
init:'a ->
f:
(Tezos_base.TzPervasives.P2p_peer.Id.t ->
('msg, 'peer_meta, 'conn_meta) connection ->
'a ->
'a) ->
'aval iter_connections :
('msg, 'peer_meta, 'conn_meta) net ->
(Tezos_base.TzPervasives.P2p_peer.Id.t ->
('msg, 'peer_meta, 'conn_meta) connection ->
unit) ->
unitval on_new_connection :
('msg, 'peer_meta, 'conn_meta) net ->
(Tezos_base.TzPervasives.P2p_peer.Id.t ->
('msg, 'peer_meta, 'conn_meta) connection ->
unit) ->
uniton_new_connection p2p f registers a function f that is called everytime we were successfully connected to a peer (after having initialised a secured channel).
This function will not be called if we started to connect to a peer and the connection was rejected during the initialisation of the connection. For example, if the peer is using a different network version.
val on_disconnection :
('msg, 'peer_meta, 'conn_meta) net ->
(Tezos_base.TzPervasives.P2p_peer.Id.t -> unit) ->
uniton_disconnection p2p f registers a function f that is called everytime we disconnect from a peer after we were successfully connected to a peer (this call may happen at any moment during the disconnection). The library ensures that anytime f peer is called, then for any callback registered with on_new_connection, those callbacks would have been called with peer in the first place (if the callbacks were registered at that time).
A direct implication of this is that any callback registered with this function will not be called if we started to connect to a peer and we disconnect from it because the connection was rejected somehow.
val greylist_addr :
('msg, 'peer_meta, 'conn_meta) net ->
Tezos_base.TzPervasives.P2p_addr.t ->
unitval greylist_peer :
('msg, 'peer_meta, 'conn_meta) net ->
Tezos_base.TzPervasives.P2p_peer.Id.t ->
unitval watcher :
('msg, 'peer_meta, 'conn_meta) net ->
Tezos_base.TzPervasives.P2p_connection.P2p_event.t Lwt_stream.t
* Lwt_watcher.stopper